New Brunswick Workplace safety training audit
Most compliance checklists ask how many workers you have and stop there. This one asks what you actually operate and what your people are exposed to — because a boom lift, a confined space and a silica dust cloud each carry their own training requirement, and those are the ones that get missed.
- Takes about three minutes
- Findings cite the regulation where we've verified it
- Runs in your browser — nothing is sent to us
- New Brunswick rules applied
Start faster (optional)
Describe what your business does in a sentence or two and we'll tick what we can. You review everything before it counts — nothing is assumed on your behalf.
Your worksite
Province sets which rules apply. Postal code is only used to find providers near you — it never changes the findings.
Committees, written programs and policy obligations trigger on the size of the whole workplace, not on who's present at once.
Distance from medical care raises first aid requirements in every province. It's the most commonly missed one.
Province and worker count are needed before we can assess anything.
Understanding New Brunswick safety training requirements
Workplace safety in New Brunswick is enforced by WorkSafeNB. Most employers know they need first aid coverage and size it by headcount. The requirements that actually generate orders and stop-work notices are the ones tied to specific equipment and specific exposures — and those are invisible on a headcount-based checklist.
Fall protection is generally triggered at 3 metres in New Brunswick under General Regulation, N.B. Reg. 91-191, s. 49(1), which states that the employer must provide and the employee must continually use a fall-protection system when working from an unguarded area 3 m or more above water or the nearest permanent safe level, above anything that could cause injury on contact, or above an open-topped tank, bin, hopper or vat.. It also applies below that height where what is underneath presents an unusual risk, which catches a lot of people working over machinery or open floor openings.
Equipment training is largely national rather than provincial. Lift trucks follow CSA B335, and elevating work platforms follow CSA B354.7 and B354.8— the same documents in every province, adopted or referenced by each jurisdiction's own regulation. That is why an operator card alone does not satisfy the requirement: the standards call for a practical evaluation on the class of machine at the workplace where it will be used.
A boom lift is the clearest example of a requirement people miss. Because the platform can travel outside the machine's base and can catapult an occupant over the guardrails, fall arrest is required inside it — so a boom lift needs both MEWP operator training and fall protection training. A guardrailed scissor lift generally does not, and being told otherwise is how employers end up paying for training nobody needed.
Distance from medical care is the other commonly missed input. Every province escalates first aid supplies and the required level of first aider as a site gets further from definitive care, so a remote site sized on headcount alone will be under-provisioned.
New Brunswick provisions we have checked against the regulation
Each was read from WorkSafeNB's own published text on the date shown. Where we have not verified a provision we say so rather than cite one.
- At what height is fall protection required in New Brunswick?
- The employer must provide and the employee must continually use a fall-protection system when working from an unguarded area 3 m or more above water or the nearest permanent safe level, above anything that could cause injury on contact, or above an open-topped tank, bin, hopper or vat.General Regulation, N.B. Reg. 91-191, s. 49(1)checked 2026-07-27
- What first aid does a New Brunswick workplace need?
- Kits, first aid providers and first aid rooms must be provided per Schedule A, sized on the maximum number of employees present during a shift. "High hazard work" is defined in s. 2 by a specific list — project sites and mines, confined spaces, isolated areas away from emergency medical help, electrical systems, foundries, processing plants, woodland operations, explosives and heavy equipment — and raises what is required. Training follows CSA Z1210-17.First Aid Regulation, N.B. Reg. 2004-130, s. 4(1)checked 2026-07-27
Operating in more than one province?
The requirements differ by more than most people expect — thresholds, the level of first aider, even whether a policy has to be posted. Run the audit for each place you work.
What this tool is, and isn't
It is a structured read of what the rules commonly require for a site like the one you describe, written to be checkable — where we cite a section, we have opened the regulation and recorded the date. It is not legal advice and not a substitute for WorkSafeNB, and some requirements turn on details no short form can capture. Treat a finding as a question to answer, not a verdict.